Description
Benelec 10108A – Antenna UHF Base and Lead 3.6m RG58 to UHF Plug
Re-Usable Screw/Solder Type UHF Connector fitted
.UHF Mobile Antenna Prepared Lead,
UHF Base 3.6m RG58 C/U & Re-Fit UHF plug
The 10108A Mobile antenna lead is pre-terminated with an
Australian type quality UHF base 5/16” Male Stud Antenna
interface. It is designed for mobile vehicle panel mounting
and UHF plug is pre-terminated at the cable end.
The lead can be fitted to any mobile antenna mounting
that offers a 5/16″ female mounting hole.
The UHFp (PL-259) is small enough to generally allow
routing of the lead through the vehicle without the need
for special tools to terminate the end.
Direct to Vehicle body panels for Mobile Ground Dependent
Antennas with Australian 5/16” female termination.
Pre-terminated with UHF Base
Designed for panel mounting
Small UHFp allow easy routing of the lead
through the vehicle
Pre-terminated with UHF plug
Very reliable
Any base that offers a 19mm (3/4″) Mounting hole
Specifications
Base: 02740 UHF Base Panel mounted Mounting hole: 19mm (3/4”)
Cable: RG58C/U Coaxial Cable Length: 3.6m
Frequency: 1 – 520 MHz Termination: UHF plug (PL-259,
.
